What are the parameters affecting the steel plate cutting process?

1. Focus
Focus is one of the most important factors affecting cutting. The height of the focus determines the size of the cutting gap, and the height of the lifting and lowering of the focus of the plate with different thickness is different.

2. Air pressure
The greater the air pressure is, the worse the end face is. If the air pressure is small, the reverse slag or hanging round slag will not be cut.

3. Power
The power of carbon steel should not be too large. The higher the power is, the more unstable the laser mode is, and the cutting end face is poor.

4. Speed
If stainless steel is slow, slag will also hang.

5. Selection of cutting nozzle
The diameter of cutting nozzle affects the air flow during cutting. The thicker the plate, the larger the diameter of cutting nozzle.

6. Punch
The damage of the lens mainly comes from the anti slag, while the carbon steel mainly comes from the anti slag damage of the lens when the hole is punched and the hole is broken