X12CrMo5 alloy steel plate chemical composition

Introduction of X12CrMo5 steel plate:
X12CrMo5 is an alloy special steel with high temperature performance, executive standard: EN10028-2, number: 1.7362, the material is used in the manufacture of industrial boilers and in petroleum.

X12CrMo5 steel plate size, shape, weight and tolerance:
The size, shape, weight and tolerance of X12CrMo5 steel plate shall comply with the provisions of EN10029, and the tolerance of thickness shall be in accordance with the class B deviation of EN10029.

Delivery status of X12CrMo5 alloy steel plate:
X12CrMo5 steel plates are usually delivered in a normalized and tempered state with a thickness of less than 150mm, and in a quenched and tempered state greater than 150mm to 250mm. According to the negotiation between the supplier and the buyer, the delivery status can be unprocessed.

Chemical composition of X12CrMo5 steel plate:
The chemical composition (melting analysis) of X12CrMo5 steel should meet the requirements (%) below:
C: 0.1-0.15, Si ≤0.5, Mn: 0.3-0.6, P≤0.02, S≤0.005, Cr: 4.0-6.0, Cu≤0.3, Mo: 0.45-0.65, Nb≤0.3, Al≤0.012

X12CrMo5 steel plate is for European pressure vessels and it is a high-temperature-resistant alloy structural steel plate. X12CrMo5 alloy steel plate is used in the manufacture of reactors, heat exchangers, separators, spherical tanks, oil and gas tanks, liquefied gas tanks, nuclear reactor pressure shells, and liquefied petroleum gas cylinders, turbine volute, etc.