DIN HII pressure vessel steel sheet cold bending performance

BBN is a DIN HII pressure vessel steel sheet world leader in exporting A106 / SA 106 pipe and stocks a full range of grades B/C with a size rage NPS 1/8" to NPS 48", with nominal (average) wall thickness as given in B36.10.

After quenching and tempering, 40Cr alloy steel plate and DIN HII pressure vessel steel sheet sheet have good comprehensive mechanical properties, good low temperature impact toughness and low notch sensitivity. The hardenability of steel DIN HII pressure vessel steel sheet is good. It can be hardened to Ф28 ～ 60mm during water quenching and Ф15 ～ 40mm during oil quenching. In addition to quenching and tempering, this steel is also suitable for cyanidation and induction hardening. The cutting performance is better. When the hardness is HB174 ～ 229, the relative cutting workability is 60%. 40Cr alloy steel is suitable for making medium-sized plastic molds.

A514 gr.H quenched and tempered alloy steel sheet chemical composition (melting analysis)%
C: 0.12-0.21, Si: 0.20-0.35, Mn: 0.95-1.30, P max.: 0.035, S max.: 0.035, Cr: 0.40-0.65, Ni: 0.30-0.70, Mo: 0.20-0.30, V: 0.03-0.08, B: 0.001-0.005
The mechanical properties in thickness (mm)T≤65
Yield strength (≥Mpa): 690
Tensile strength (Mpa):760-895
Elongation in ≥,%: 18

Since its establishment, the company has been deeply supported and loved by customers with its unique business philosophy and business model. The company has always adhered to the tenet of "credibility first, integrity-based, quality first" and sincerely serves new and old customers. At the same time, it keeps pace with the times based on market orientation, continuously expands offline channels, and gradually establishes a complete online E-commerce business management platform. We will always promote our after-sales service to make client satisfied with our goods.