The size, shape, weight and allowable deviation of 07Cr2AlMoR steel sheet shall comply with the provisions of GB/T 709 standard.
Thickness deviation shall be implemented according to Class B or Class C of GB/T709.
Smelting analysis of chemical composition and chemical elements of 07Cr2AlMoR steel sheet:
| C | Si | Mn | P | S | Ni | Cr | Mo | Cu | Alt |
| ≤0.09 | 0.2-0.5 | 0.4-0.9 | ≤0.02 | ≤0.010 | ≤0.3 | 2-2.4 | 0.3-0.5 | ≤0.3 | 0.3-0.5 |
Mechanical properties of 07Cr2AlMoR steel sheet:
| Thickness | Thickness | Mechanical properties | ||
| 10-16 | 6-36mm | ReL(MPa) | ≥260 | When the yield is not obvious, use Rp0.2 |
| Rm(MPa) | 420-580 | |||
| A(%) | ≥21 | |||
| Impact temperature (℃) | 20 | |||
| Akv(J) | ≥47 | |||
| Bending diameter | 3a | |||
| Bending angle | 180 | |||
| >16-36 | Delivery Status | Normalized + tempered | ||
| >36-60mm | ReL(MPa) | ≥250 | When the yield is not obvious, use Rp0.2 | |
| Rm(MPa) | 410-570 | |||
| A(%) | ≥21 | |||
| Impact temperature (℃) | 20 | |||
| Akv(J) | ≥47 | |||
| Bending diameter | 3a | |||
| >36-60 | Bending angle | 180 | ||
| Delivery Status | Normalized + tempered | |||
07Cr2AlMoR steel sheet application:
07Cr2AlMoR steel sheet is widely used in petroleum, chemical, power station, boiler and other industries to make reactors, heat exchangers, separators, spherical tanks, oil and gas tanks, liquefied gas tanks, nuclear reactor pressure shells, boiler drums, liquefied petroleum gas cylinders, high-pressure water pipes of hydropower stations, turbine volutes and other equipment and components.
Email：bb@bebonchina.com
Tel：0086-371-86151827
Skype：bebonchina
