12Cr1MoVR pressure vessel steel sheet 200 tons exported to Cairo

The basic principle of 12Cr1MoVR pressure vessel steel sheet, heat treatment of steel: put the metal workpiece in a certain medium and heat it to a suitable temperature, keep it in this temperature for a certain time, and then cool it at different speeds. Objective: to obtain the desired structure and properties by means of heating, heat preservation and cooling, so as to make the metal workpiece have the required mechanical, physical and chemical properties.

We can process the steel materials according to your drawing. Or if you can not make drawing, please send us 12Cr1MoVR pressure vessel steel sheet specific data and requirements, our technical department can make design and drawing for you, and then confirm with your technician or engineer. If all is OK, our processing center will process the steel materials according to the drawing. So no matter what size and shapes you need, we can meet demands at the most time.

The visual inspection (VI) or visual detection method is to scan the surface of the steel plate through a machine vision system (CCD line camera), convert the captured target into an image signal, and send it to a dedicated image 12Cr1MoVR pressure vessel steel sheet processing system, which converts it into a digital signal based on pixel distribution and brightness, color and other information. The system performs various operations on these signals to extract the characteristics of the target, and then controls the operation of the equipment on the spot according to the result of the discrimination. Visual detection method can achieve online high-speed detection for the 12Cr1MoVR pressure vessel steel sheet steel plate.

The weldability of 12Cr1MoVR pressure vessel steel sheet is good. It means that under certain process and construction conditions, 12Cr1MoVR pressure vessel steel sheet can obtain good performance after welding. Weldability is a measure of the hot workability of steel. Weldability can be divided into weldability in construction and weldability in use. Weldability in construction refers to the sensitivity of cracking in weld metal and near seam zone, and hardening sensitivity of steel in near seam zone. Good weldability means that under certain welding process conditions, the weld metal and steel near the seam do not produce cracks. Weldability in use means that the mechanical properties of weld and HAZ steel are not lower than those of base metal.