Technical requirements for marine grade FH32 steel plate

At the same time of doing well in marine grade FH32 steel plate production and operation, Yunnan company focused on completing the four phases of technical transformation construction projects, realizing industrial upgrading, improving equipment level, and laying a good foundation for the future development of the company. In the marine grade FH32 steel plate technological transformation project, pollution control facilities have been built synchronously, and a large number of comprehensive utilization projects, such as comprehensive sewage treatment and recycling project, blast furnace gas waste heat and residual pressure power generation, have been invested and constructed.

The strength indexes of marine grade FH32 steel plate pipeline steel mainly include tensile strength and yield strength. At the same time, the yield strength ratio (yield strength to tensile strength ratio) of pipeline steel is also required, which is generally in the range of 0.85-0.93. Pipeline steel shall have enough high impact toughness (crack initiation and crack arrest toughness). For the base metal, when the toughness of the marine grade FH32 steel plate material meets the requirements of crack arrest, its toughness generally can also meet the requirements of crack prevention.

20# steel is carbon steel with carbon content of about 0.20%. It belongs to low carbon steel with high quality. The equivalent material of 20# steel is S20C. 20# steel has low strength and hardness, good plasticity and toughness, good carburizing effect and good weldability. 20# steel is often used to make pressure parts (such as gasket, chain piece), carburizing parts (gear, CAM), welding parts, plastic mold, etc.

During the construction of hot-dip marine grade FH32 steel plate galvanized pipe, the correct welding process shall be adopted, the inspection and acceptance shall be carried out in strict accordance with the specification, and the anti-corrosion treatment (zinc rich paint) shall be done timely after the welding is completed. It is feasible in the construction process of open and closed air conditioning system, which can improve the marine grade FH32 steel plate construction speed and the firmness of the pipe connection. Therefore, the hot-dip galvanized pipe can be welded and connected under the construction conditions and on the premise of relevant protection and anti-corrosion measures.

SA537 grade 70 steel with the thickness range is 1.2-600mm, the width range is 1220-4200mm, and the length range is 5000-18000mm. Also note that the marine grade FH32 steel plate, SA537 grade 70 steel coil thickness should not exceed 25 mm. The mechanical properties of SA537 grade 70 steel is yield strength is 290MPa, and the tensile strength is 485-620Mpa.

The company's after-sales service team is a high-quality professional team. Most after-sales employees have rich service experience and have reached the level of after-sales engineer. The after-sales department implements the after-sales personnel responsibility system and a 24-hour response mechanism. The company's advanced customer relationship management system provides customers with "standardized and streamlined services". A sound customer relationship maintenance system, and a "one-stop" customer satisfaction tracking system, all reflect our strong after-sales service guarantee.