Steel St52-3 Plate marine steel

At the same time of doing well in Steel St52-3 Plate production and operation, Yunnan company focused on completing the four phases of technical transformation construction projects, realizing industrial upgrading, improving equipment level, and laying a good foundation for the future development of the company. In the Steel St52-3 Plate technological transformation project, pollution control facilities have been built synchronously, and a large number of comprehensive utilization projects, such as comprehensive sewage treatment and recycling project, blast furnace gas waste heat and residual pressure power generation, have been invested and constructed.

S355J2+N steel plate belongs to the European standard low alloy structural steel grade. S355J2 steel is equivalent to Q345D grade. Steel St52-3 Plate, S355J2+N low alloy steel plate is widely used in bridges, vehicles, ships, building steel structures. Mechanical properties of S355J2+N steel: Yield strength: ≤16mm: ≥355; 16-40: ≥345; 40-63: ≥335; 63-80: ≥325;80-100: ≥315; 100-150: 295; 150-200: ≥285; 200-250: ≥275; 250-400: ≥265. Tensile strength: 450-680MPa.

If a destructive accident occurs during the use of the boiler, it will cause serious losses. Therefore, other than some common strengths with Steel St52-3 Plate, the boiler steel plate must have good physical properties, mechanical properties and workability, and be strictly specified in the technical terms of the material standard to meet its safety in use. High temperature (above creep temperature) boiler steel plates are generally low-alloy heat-resistant steels, such as chromium molybdenum steel, chromium molybdenum vanadium steel, chromium molybdenum tungsten steel, etc.

S355J2 steel plate rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the Steel St52-3 Plate rolling speed is 1.6-2.0m/s, the single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.As a basic building material, steel plates are currently widely used in automobiles, shipbuilding, chemical industry, aerospace and other fields. Reasonable selection of flaw detection methods to ensure the quality of Steel St52-3 Plate steel plates is of great significance to safe production. Common defects of steel plates are folding, inclusion, shrinkage, air bubbles, delamination and cracks. These problems can be discovered in time through flaw detection.

Chemical composition of Q420 steel: C ≤ 0.20, Si ≤ 0.50, Mn ≤ 1.70, P ≤ 0.035, S ≤ 0.035, Nb ≤ 0.07, V ≤ 0.20, Ti ≤ 0.20, Cr ≤ 0.30, Ni ≤ 0.80, Cu ≤ 0.30, N ≤ 0.015, Mo ≤ 0.20. The mechanical properties of Q420 steel are: yield strength ≥ 340 MPa, tensile strength 500-680 MPa, elongation after fracture ≥ 18%, impact energy 34J. Steel St52-3 Plate, Q420 steel has good mechanical properties and weldability, good cold and hot workability. Q420 steel is mainly used for manufacturing mining machinery, heavy vehicles, ships, bridges, medium and high pressure boilers, vessels and other large welding and structural parts.

To provide customers with the most satisfactory service and realize the win-win of economic and social benefits, our company promises to provide excellent Steel St52-3 Plate products in this bidding, and in line with the attitude of being serious and responsible to customers, before sending goods to users, the Steel St52-3 Plate technical personnel shall confirm that there is no fault in the equipment before sending goods to users, and then send goods and products to users, and formulate the following service terms.