Steel S550QL1 Plate main application data

The difference between application of 20# steel and Q345 steel. 20# steel is mainly used for making parts, which can be heat treated; Q345 steel is mainly used for making engineering structural parts, which is usually not heat treated. Q345 steel does not emphasize the composition, but its yield strength must be above 345mpa. Because the composition Steel S550QL1 Plate is not fixed, Q345 steel is difficult to heat treatment (the temperature and time control of heat treatment are related to the composition, and different components use different processes).

The company has superior geographical location and convenient transportation. After more than 20 years of market trials and tribulations, from small to large, from weak to strong, in order to meet the needs of customer extension development, the company expanded the deep Steel S550QL1 Plate processing services of cutting steel pieces. Now we have built a business system integrating steel plate, steel plate cutting and Steel S550QL1 Plate steel deep processing. The company provides one-stop solution for customers with lower price, higher quality and faster response speed.

The main applications of normalizing are as follows:① For low carbon steel, Steel S550QL1 Plate. The hardness of low carbon steel after normalizing is slightly higher than that after annealing, and the toughness is also better, so normalizing can be used as the pretreatment of cutting.② For medium carbon steel, normalizing can be used as the final heat treatment instead of quenching and tempering treatment, or as the preparation treatment before surface quenching by induction heating.③ Normalizing can be used in tool steel, bearing steel, carburizing steel and so on, which can eliminate or inhibit the formation of network carbide, thus obtaining the good microstructure needed for spheroidizing annealing.④ Normalizing can refine the cast structure and improve the machinability of steel castings.

Alloy steel plate: The primary purpose of adding alloy elements to steel is to improve the hardenability of the steel, and it is easy to obtain martensite during quenching. The second is to improve the tempering stability of the steel to keep the martensite at a higher temperature, so that the carbides precipitated during the tempering of the quenched steel are smaller, uniform and stable. In this way, under the same conditions, alloy steel has higher strength than carbon steel, Steel S550QL1 Plate.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.