Steel Plate 1/4" Q390C steel material

Q390C steel material,Our company's power boilers, heating furnaces of double bars, double high lines and medium and thick plates all adopt heat storage technology, which can fully use blast furnace gas; the ladle baking, Maerz active lime kiln and medium and thick plate heat treatment furnace all burn converter gas, which can improve the utilization rate of secondary energy and realize negative energy steelmaking in steelmaking process.

The main component of Q390C steel material manganese plate is manganese, which is a relatively powerful element type, and plays a more important role in long-term development and continuous use The main characteristics of manganese plates are high hardness and high strength For general manganese plates, it is necessary to enhance the compressive capacity of manganese steel plates and various basic corrosion resistance capabilities For common manganese plates, pay attention to use, choose good specifications and classifications, thus the use value of manganese plates will be better,Q390C steel material.

Q245R boiler steel plate introduction: Q is the first letter of "Qu" Chinese Pinyin; Number 245 is the yield strength value; R: is the first character of "Rong" Chinese Pinyin Q245R steel is a special plate for pressure vessels and boilers with a yield strength of 245MPa It has outstanding mechanical properties and processability If you have special requirements, our company can supply Z15, Z25, Z35 and other Z performance tests,Q390C steel material.

"Our mill has three production lines:
1).2500mm production line (Width: 1600-2300mm, Thickness: 6-30mm, Annual capacity: 1,600,000 Tons;
2).3500mm production line (Width: 2000-3050mm, Thickness: 10-80mm, Annual capacity: 2,000,000 Tons;
3).4300mm production line (Width: 1500-4100mm, Thickness: 6-300mm, Annual capacity: 1,800,000 Tons;
The weight of each ingot can reach 44 tons, which is at the leading level in China. In addition, we have a 1700mm hot-rolled coil production line (width range: 900-1550mm, thickness range: 1.2-25.4mm, annual production capacity: 3.5 million tons."

Q390C steel material,The proportion of main elements in Q345 steel is basically the same as that in 16Mn steel, the difference is that V, Ti, Nb microalloy elements are added. A small amount of V, Ti, Nb alloy elements can refine the grains, greatly improve the toughness of the steel, and greatly improve the comprehensive mechanical properties of the steel. Because of this, the thickness of Q345 steel plate can be made larger. Therefore, the comprehensive mechanical properties of Q345 steel should be better than that of 16Mn steel, especially its low temperature properties. The allowable stress of Q345 steel is slightly higher than that of 16Mn steel.

Q390C steel material,The company strengthens process management and pays attention to assessment. One of the key points of good service is to strengthen the process management and improve the evaluation mechanism. Make the after-sales service system more perfect and provide better service for customers.
Q390C steel material