S500MC automobile steel plate sheet with high tensile properties

Nowadays, transportation is an important factor in economic development. Our company's rapid development is also inseparable from a good geographical location. The company is located in Zhengzhou, an important heavy industry area in Central China. Whether you are in Beijing, Shanghai or Guangzhou, you can visit our company very easily. My factory is nearby, convenient transportation and time saving.

S500MC automobile steel plate,Manganese steel plate is subdivided according to material grade: Q345A, Q345B, Q345C, Q345D, Q345E, S500MC automobile steel plate. The main differences according to the classification are as follows: A needs no impact test, B needs room temperature impact test (20 degrees above zero), C needs zero degree impact test, D needs minus 20 degree impact test, and E needs minus 40 degree impact test. The most important characteristic of manganese steel plate is that under the condition of strong impact and extrusion, the surface layer rapidly hardens, but the core still maintains good toughness and plasticity, and the hardened layer has good wear resistance.

S235JR steel plate is one mainly of Carbon and low alloy steel, S235JR steel plate is a type of steel sheet under EN standard which is used to build ship, bridge, belongs to high strength sheet. EN10025-2 S235JR is equivalent to DIN:ST37-2,JIS:SS400,ASTM:A283C, GB Q235B and UNI:FE360B.
S500MC automobile steel plate

S500MC automobile steel plate,The steelmaking furnace can only be used as primary refining, and the refining needs to be completed in the refining equipment outside the furnace, which is also called secondary refining. It is mainly through decarburization, desulfuration, denitrification and dephosphorization to improve the cleanness of the steel, to establish a chromium molybdenum low alloy steel with good oxidation resistance and high temperature strength, to remove unwanted harmful impurities from the steel, and to improve the internal quality of the steel.

The hardness of wear-resistant steel plate is an important standard to measure wear resistance. The hardness of wear-resistant steel plate can be divided into microhardness and surface hardness. The microhardness of carbide in the wear-resistant layer of wear-resistant steel plate can reach over HVl700-2000, and the surface hardness can reach HRC58-62. Chromium alloy is the main wear-resistant layer of wear-resistant steel plate, and other alloy components such as manganese, molybdenum, niobium, nickel are added at the same time.
S500MC automobile steel plate

S500MC automobile steel plate,Our quality and service commitment: product quality problems, life-long replacement.
In the process of using, any time if you find we supplied steel materials not conform to the requirements of technical standards, we can replace it for you free of charge. However, it should be noted that non product quality problems caused by improper use are not covered by the warranty. Please pay attention to the service time commitment as well as the product quality assurance commitment. Because only the products of big brands and reliable enterprises with complete after-sales service system can truly realize the long-term product quality assurance and the whole process of service.
S500MC automobile steel plate