Popular Steel A572 Gr 50 Plate material hardness

CCS Grade B hot rolled steel is a ordinary strength marine steel plate. Our plates and sheets thickness are supplied up to 150mm. We have stock of Steel A572 Gr 50 Plate, CCS Grade B hot rolled steel: 5.5*2790*10680, 27*1700*4350, 18*2000*10000, 9*2310*7060, 27*1700*4350, 45*2200*10000, 12*2000*10000, 16*2000*10000, 50*1770*7730, 14*1800*10000, 14*2000*10000, 11*1650*9000, 75*1050*9140, 40*2200*10000, 18*2000*9820, 14*2000*10000, 30*1500*6000, 75*1430*9140, 40*2000*8000, 80*1800*7000.

40Cr steel belongs to alloy structural steel. Steel A572 Gr 50 Plate, 40Cr steel has good comprehensive properties, low temperature impact toughness and low notch sensitivity after quenching and tempering on the basis of high-quality carbon structural steel No. 40. 40Cr steel mechanical properties: tensile strength: ≥ 980mpa, yield strength: ≥ 785MPa, elongation after fracture: ≥ 9%, elongation after fracture: ≥ 45%, impact absorption energy: ≥ 47J. 40Cr steel chemical composition: C: 0.37-0.44, Si: 0.17-0.37, Mn: 0.50-0.80, Cr: 0.80-1.10.

The main applications of normalizing are as follows:① For low carbon steel, Steel A572 Gr 50 Plate. The hardness of low carbon steel after normalizing is slightly higher than that after annealing, and the toughness is also better, so normalizing can be used as the pretreatment of cutting.② For medium carbon steel, normalizing can be used as the final heat treatment instead of quenching and tempering treatment, or as the preparation treatment before surface quenching by induction heating.③ Normalizing can be used in tool steel, bearing steel, carburizing steel and so on, which can eliminate or inhibit the formation of network carbide, thus obtaining the good microstructure needed for spheroidizing annealing.④ Normalizing can refine the cast structure and improve the machinability of steel castings.

The company will rely on its good reputation, excellent hot-rolled plates, steel pipes, steel structure products, and intimate Steel A572 Gr 50 Plate after-sales service to customers. I would like to express my heartfelt thanks to the old and new friends and customers who have always given care, support and help to the company! The company sincerely hopes to establish a long-term cooperative relationship with them, mutual benefit and common development. Welcome to come and visit our Steel A572 Gr 50 Plate steel mill.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.