Material weather resistant Q355GNH steel grade density

13CrMo4-5 steel plate delivery status and production process is strictly produced according to EN10028-2 standard. Delivery status: normalizing + tempering, tempering. The 13CrMo4-5 alloy plates thickness below 100mm, it is normalizing + tempering; Thickness 100mm-150mm, the plate is delivered in normalizing + tempering or quenched and tempered;150mm-250mm is delivered in tempered condition. The requirements for flaw detection levels, and Z-direction functional requirements can also be added.

Advantages of weather resistant Q355GNH steel, ordinary carbon killed steel plate: there is no gas in the steel plate, the impurity is relatively small, the stress is very uniform, and it has good welding performance. It is widely used in parts with high requirements. Disadvantages of ordinary carbon killed steel plate: the surface quality of the killed steel plate is not as good as that of boiling plates, there are concentrated shrinkage holes, and the killed steel plate price is more expensive.

Tempering the important weather resistant Q355GNH steel welding structure often use high temperature tempering to remove residual weld stress. Classification: high temperature tempering above 400 ℃, medium temperature tempering 250 ~ 400 ℃, low temperature tempering 150 ~ 250 ℃, Quenching +Tempering is improve weather resistant Q355GNH steel strength, plasticity and toughness.

Analyze the advantages and disadvantages of the products against the competitive weather resistant Q355GNH steel products. Understand the industry situation and future trend. Understand the product brand positioning appeal point, focus on the crowd and development direction. Understand the layout of each market area, and form a big strategic layout view. Understand the basic operation and assessment standards of work responsibilities. Understand the situation of the cooperative customers.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.