marine grade DH32 steel plate structural specification scope freely

BEBON has been engaged in the piping industry as a professional manufacturer and supplier of steel plates, ship plates, corten steel, pressure vessels, marine grade DH32 steel plate steel pipelines, seamless pipe and ERW pipes since the inception. We provide integrated solutions to whole-package procurement covering miscellaneous ferrous and non-ferrous piping components. The products are widely used in oil & gas project, subsea or offshore platform piping, marine grade DH32 steel plate chemical & pharmaceutical pipeline, power plant, sewage treatment, water supply piping, heat exchange application.

The Cr-Mo alloy steel pipe fittings manufactured to ASTM A234 includes the grades of WP1, WP12 CL1, WP12 CL2, WP11 CL1, WP11 CL2, WP11 CL3, WP22 CL1, WP22 CL3, WP24, WP5 CL1, WP5 CL3, WP9 CL1, WP9 CL3, WP91, WP911, WP92. The BW pipe marine grade DH32 steel plate fittings can be made from either seamless pipes, or fusion-welded pipes which shall be with filler metal added and shall conform to the chemical requirements of the standard specification.

There is no weld on the outer surface of seamless steel pipe, which is the change from round steel progressive perforation to hollow round bar, with good compression resistance. According to different materials, the processed finished products marine grade DH32 steel plate are applicable to a wide range of fields (for example: machine gearbox gears, gear wheel axles, cams, worms, piston pins, claw clutches, high-pressure pipes and various fasteners, high-grade carburized parts, such as gears, shafts, etc.) in the medium containing nitrogen hydrogen mixture for fluid transmission. It can improve the utilization of materials.

The main applications of normalizing are as follows:① For low carbon steel, marine grade DH32 steel plate. The hardness of low carbon steel after normalizing is slightly higher than that after annealing, and the toughness is also better, so normalizing can be used as the pretreatment of cutting.② For medium carbon steel, normalizing can be used as the final heat treatment instead of quenching and tempering treatment, or as the preparation treatment before surface quenching by induction heating.③ Normalizing can be used in tool steel, bearing steel, carburizing steel and so on, which can eliminate or inhibit the formation of network carbide, thus obtaining the good microstructure needed for spheroidizing annealing.④ Normalizing can refine the cast structure and improve the machinability of steel castings.

Mechanical properties of 45# steel high-quality carbon structural steel: Tensile strength σb (MPa): ≥600, yield strength σs (MPa): ≥355, elongation δ5 (%): ≥16, section shrinkage ψ (%): ≥40, impact energy Akv (J): ≥39. 45# steel impact toughness value αkv (J / cm2): ≥49 (5), hardness: unheated, ≤229HB; annealed steel, ≤197HB. marine grade DH32 steel plate, 45# steel chemical composition % (Carbon: 0.42 to 0.50, Silicon: ≤0.40, Manganese: 0.50 to 0.80, Sulfur: ≤0.045, Phosphorus: ≤0.045, Chromium: ≤0.40, Nickel: ≤0.40, Molybdenum: ≤0.10).

We guarantee to provide all technical data required by users within one hour to provide reasonable quotation; to provide marine grade DH32 steel plate reasonable quotation for products consulted by users within one hour; to provide investigation reception: we guarantee to receive the investigation of users at any time and provide various convenient conditions for users.