JIS G3106 SM520C steel material chemical composition

JIS G3106 SM520C steel material,The company covers an area of 15,000 square meters and the plant construction area is 10,000 square meters. We have introduced more than 50 sets of advanced production equipment, auxiliary equipment and testing equipment at home and abroad, more than 260 employees, more than 20 middle and senior management staff, more than 10 professional and technical personnel, annual production capacity of 100,000 tons. Main products: flat steel, steel pipe, steel plate, section steel, steel structure processing parts, etc. We also accept incoming materials and annealing processing.

JIS G3106 SM520C steel material,Boiler steel plate JIS G3106 SM520C steel material mainly refers to the hot-rolled medium and heavy plate materials used to manufacture superheater, main steam pipe and heating surface of boiler fire chamber. The main boiler steel materials are high-quality structural steel and low-alloy heat-resistant steel. Common boiler steel includes low-carbon killed steel JIS G3106 SM520C steel material smelted in open furnace or low-carbon steel smelted in electric furnace, with carbon content WC in the range of 0.16% - 0.26%.
JIS G3106 SM520C steel material

JIS G3106 SM520C steel material,Main characteristics of 12Cr1MoV Steel: compared with 12CrMoV steel, 12Cr1MoV steel has higher oxidation resistance and thermal strength. The creep limit of 12Cr1MoV steel is very close to the endurance strength value, and it has high plasticity under the condition of endurance tension; the processability and weldability of 12Cr1MoV steel are good, but it needs to be preheated to 300 ℃ before welding, and stress removal treatment after welding. 12Cr1MoV steel is widely used in Superheater, header and main steam pipe of high pressure, ultra-high pressure and subcritical utility boiler.

JIS G3106 SM520C steel material,Hot rolled steel coil and plates are among our main products. Hot rolling can significantly reduce energy consumption and cost. During hot rolling, the metal has high plasticity and low deformation resistance, which greatly reduces the energy consumption of metal deformation. Hot rolling can improve the processing properties of metals and alloys, that is, the coarse grains in the casting state are broken, cracks are obviously healed, casting defects are reduced or eliminated, the as cast structure is transformed into deformed structure, and the processing properties of alloys are improved.

SA387Gr11CL2 steel chemical composition(%): C: ≤0.15, Si: 0.44—0.86, Mn: 0.35—0.73, P: ≤0.10, S: ≤0.007, Cr: 0.94—1.56, Mo: 0.40—0.70, Ni: ≤0.25, Cu: ≤0.20, Sb: ≤0.0030, Sn: ≤0.015, As: ≤0.016.
SA387Gr11CL2 steel mechanical properties:
Tensile strength, ksi [MPa]: 75 to 100 [515 to 690]; Yield strength, min, ksi [MPa]: 43 [310]
Elongation in 8 in. [200mm], min %: 18; Elongation in 2 in. [50mm], min, %: 22

The company formulates clear service process and service standard. To do a good job in after-sales service, first of all, clear service process and service standards should be formulated to let employees know which procedures to perform and which service standards to abide by.