Hot rolled QStE340TM automobile steel plate production process

The company covers an area of 15,000 square meters and the plant construction area is 10,000 square meters. We have introduced more than 50 sets of advanced QStE340TM automobile steel plate production equipment, auxiliary equipment and testing equipment at home and abroad, more than 260 employees, more than 20 middle and senior management staff, more than 10 professional and technical personnel, annual production capacity of 100,000 tons. Main products: flat steel, QStE340TM automobile steel plate steel pipe, steel plate, section steel, steel structure processing parts, etc. We also accept incoming materials and annealing processing.

The capital letter H in S355J0H and S355J2H stands for ""Hollow section"", which respectively represents the pipe of S355J0 and S355J2.The Executive Standards of S355J0 steel and S355J2 steel, QStE340TM automobile steel plate are both EN 10025-2, the difference is that they have different temperature requirements for impact energy: S355J0 - impact energy at 0 ℃ is required to be ≥ 27J. S355J2: impact energy at - 20 ℃ is required to be ≥ 27J.

The main advantage of weather resistant steel plate is its weathering ability. When exposed to the atmosphere, the weather resistant steel plate will form a anti-corrosion film on the surface, and prevent further corrosion to the steel QStE340TM automobile steel plate. Thus the weather resistant steel plate almost needs no paint treatment, which is the important measure for carbon steel plates to avoid going rust. Therefore, the maintance cost of weather resistant steel plate is low. The weather resistant steel plate is suitable for outside structure and construction use.

The main applications of normalizing are as follows:① For low carbon steel, QStE340TM automobile steel plate. The hardness of low carbon steel after normalizing is slightly higher than that after annealing, and the toughness is also better, so normalizing can be used as the pretreatment of cutting.② For medium carbon steel, normalizing can be used as the final heat treatment instead of quenching and tempering treatment, or as the preparation treatment before surface quenching by induction heating.③ Normalizing can be used in tool steel, bearing steel, carburizing steel and so on, which can eliminate or inhibit the formation of network carbide, thus obtaining the good microstructure needed for spheroidizing annealing.④ Normalizing can refine the cast structure and improve the machinability of steel castings.

The difference of chemical composition between QStE340TM automobile steel plate, Q420D steel and Q460D steel:
Chemical composition of Q420D steel: C ≤ 0.20, Si ≤ 0.50, Mn ≤ 1.70, P ≤ 0.030, S ≤ 0.025, Nb ≤ 0.07, V ≤ 0.20, Ti ≤ 0.20, Cr ≤ 0.30, Ni ≤ 0.80, Cu ≤ 0.30, N ≤ 0.015, Mo ≤ 0.20, Al ≥ 0.015. Chemical composition of Q460D steel: C ≤ 0.20, Si ≤ 0.60, Mn ≤ 1.80, P ≤ 0.030, S ≤ 0.025, Nb ≤ 0.11, V ≤ 0.20, Ti ≤ 0.20, Cr ≤ 0.30, Ni ≤ 0.80, Cu ≤ 0.55, N ≤ 0.015, Mo ≤ 0.20, B ≤ 0.004, Al ≥ 0.015.
The difference of mechanical properties between QStE340TM automobile steel plate, Q420D steel and Q460D steel:
The mechanical properties of Q420D steel: yield strength ≥ 420 MPa, tensile strength 500-680 MPa. The mechanical properties of Q460D steel: yield strength ≥ 460 MPa, tensile strength 500-720 MPa.

Provide special product requirements to meet the personalized needs of customers. The QStE340TM automobile steel plate company arranges production and shipment strictly according to the contract, and guarantees to supply goods according to the time agreed in the contract. Provide professional consultation: we guarantee to answer any professional and QStE340TM automobile steel plate technical questions raised by users within 1 hour; provide detailed information.