Export great HARDOX400 steel material to Iran

Since its establishment, the company has always adhered to the enterprise spirit of "solid feet and lofty ideals, dare to create and take responsibility, and dedicate to work". After years of careful management, the company has achieved the double improvement of capital strength and scale expansion, gained wide recognition and general praise from all walks of life, further realized specialized and large-scale operation and optimized allocation of resources, and effectively improved the overall strength, competitiveness and anti risk ability of the company.

HARDOX400 steel material,EN10025-3 S275N steel is a normalized or normalized rolled weldable fine grain structural steel grade. S275N plates shall be under normalized delivery condition and be done low temperature impacting test at -20℃when rolling. If customers request the limited for some chemical compositions, such as P and S,our mill also can satisfy this strict request when processing owning to our highest technical. For the available thickness, , S275N plate is supplied up to 250mm.

HARDOX400 steel material,Special boiler steel is derived from carbon structural steel, The expression of boiler steel grade is similar to that of high-quality carbon structural steel, and the carbon content is usually 020% The chemical composition of boiler steel is basically the same as that of high-quality carbon structural steel of the same brand, but the mechanical properties are strictly required, especially the impact toughness, and the aging sensitivity is required to be small After deoxidation and removal of non-metallic inclusions, boiler steel has a uniform structure, the grain size is controlled at 3-7 grade, and the defects such as interlayer, shrinkage, porosity and porosity are relatively less,HARDOX400 steel material.

The steelmaking furnace can only be used as primary refining, and the refining needs to be completed in the refining equipment outside the furnace, which is also called secondary refining. It is mainly through decarburization, desulfuration, denitrification and dephosphorization to improve the cleanness of the steel, to establish a chromium molybdenum low alloy steel with good oxidation resistance and high temperature strength, to remove unwanted harmful impurities from the steel, and to improve the internal quality of the steel.

HARDOX400 steel material,09CuPCrNi-A weather resistant steel is origined in China. Its equivalent grades are JIS SPA-H, BS WR50A, Corten steel, etc. The Cu, P, Cr, Ni are important elements that gave 09CuPCrNi-A weather resistant steel its weathering ability. The Cu content of 09CuPCrNi-A steel is 0.25–0.50, P content is 0.060-0.12, Cr content is 0.30-1.25, Ni content is 0.12-0.65. For 09CuPCrNi-A steel coil ≤ 4mm, the min. yield strength is 310Mpa, min. tensile strength 440Mpa. For 09CuPCrNi-A steel sheets >4mm, the min. yield strength is 345Mpa, min. tensile strength 480Mpa.
HARDOX400 steel material

HARDOX400 steel material,"Responsibilities: dealing with quality feedback and complaints from Customer.
Bebon has the after sale service department, which is responsible to solve the problem of technical support and quality, service complaints. You can also contact the company customers service online if you have any problem when you receive the products. The responsibility is to deal with quality feedback and complaints from Customer. Welcome to come and visit our company office."HARDOX400 steel material