316 Vs 304: ASTM 316L(1.4404) is a low-carbon austenitic chromium-nickel-molybdenum steel. Due to the addition of 2-2.5% molybdenum, the corrosion resistance of the stainless steel 316L is significantly better than that of the standard austenitic grades 304 and 304L, Steel S460QL1 Plate. The 1.4404 material is resistant to intercrystalline corrosion when welded! but not resistant to sea water. Best corrosion resistance is given with a polished surface. This material is comparable to 1.4401.Since it was established in 2000. Based on the domestic rich Steel S460QL1 Plate product resources and the great steel demand of the international market, our Steel S460QL1 Plate service has already spread many countries in Europe , America, Southeast Asia, Middle East, South America, Africa, etc, and we have won an outstanding reputation for its professional exporting steel productsIn order to easily and economically perform hot or cold processing to make various parts of engineering structures, the low alloy high strength steel must have appropriate forming properties. Like Steel S460QL1 Plate, carbon structural steel, low alloy high strength steel can generally be processed in such way, as well as cutting, punching, and machining. Although the yield point of low alloy high strength steel is high, even if the forming operation is deformed quite severely, cold bending presses, drawing machines, presses and other equipment used for carbon structural steel forming can also be used for low alloy high strength steel, but some equipment needs to be modified.Composition characteristics of low alloy structural steel, Steel S460QL1 Plate: (1) Low carbon: the carbon content of low alloy structural steel is less than 0.20% due to the high requirements of toughness, weldability and cold formability. (2) The alloy elements such as manganese are added. (3) The addition of Nb, Ti or V and other auxiliary elements: a small amount of Nb, Ti or V forms fine carbides or carbonitrides in the steel, which is beneficial to obtain fine ferrite grains and improve the strength and toughness of low alloy structural steel. In addition, adding a small amount of copper (≤ 0.4%) and phosphorus (about 0.1%) can improve the corrosion resistance. The addition of a small amount of rare earth elements can remove sulfur and gas, purify the steel, and improve the toughness and process performance of low alloy structural steel.The company formulates clear service process and service standard. To do a good job in after-sales service, first of all, clear service process and service standards should be formulated to let employees know which procedures to perform and which service standards to abide by.
