BBN STEEL exported 500tons EN10025-2 S355J2 quality to Saudi Arabia

After comprehensive and professional training such as customer service, the customer service team has more strict discipline in the management of customer service team to ensure that customer service personnel respond to customers with a professional attitude. A process supervision system has been set up to let each customer supervise the process of the system with us

The yield point of the steel structure determines the stress that the structure can withstand without permanent deformation. The minimum yield point of typical carbon structural steel is 235MPa. The minimum yield point of typical low-alloy high-strength steel is 345MPa. Therefore, according to the proportional relationship of its yield point, the use of low-alloy high-strength steel allows the stress to be 1.4 times higher than that of carbon structural steel. Compared with EN10025-2 S355J2 quality, carbon structural steel, the use of low-alloy high-strength steel can reduce the size of structural parts and reduce weight.

During the welding of hardfacing wear-resistant steel plate, EN10025-2 S355J2 quality, the welding shall be carried out in strict accordance with the drawing, welding process and relevant standards. Follow the welding sequence of first welding the base layer, then welding the transition layer, and then welding the multiple layer. In order to prevent adhesion of welding spatter, anti spatter coating should be applied within 100 mm on both sides of groove of stainless steel clad plate before welding.

The Egypt customer ordered 130 tons EN10025-2 S355J2 quality stainless steel plate in stock, and this batch has left port today for its destination today(October 25th, 2019). 316l stainless steel is molybdenum-bearing austenitic stainless steel. This material has better corrosion resistant property than 304/314L for it's higher Ni and Mo content. (it is considered to be marine grade stainless steel, not suitable for warm sea water treatment). 316L austenitic stainless steel supplied by our company has good formability and weldablity, additionally it is proved to have excellent properties of tensile, creep and stress-rupture strengths in elevated temperature environment.