BBN steel 1/2 inch plate A633 Grade C steel plate

We can process the steel materials according to your drawing. Or if you can not make drawing, please send us A633 Grade C steel plate specific data and requirements, our technical department can make design and drawing for you, and then confirm with your technician or engineer. If all is OK, our processing center will process the steel materials according to the drawing. So no matter what size and shapes you need, we can meet demands at the most time.

Main characteristics of 12Cr1MoV Steel: compared with 12CrMoV steel, 12Cr1MoV steel has higher oxidation resistance and thermal strength. The creep limit of 12Cr1MoV steel is very close to the endurance strength value, and it has high plasticity under the condition of endurance tension; the processability and weldability of 12Cr1MoV steel are good, but it needs to be preheated to 300 ℃ before welding, and stress removal treatment after welding. 12Cr1MoV steel is widely used in Superheater, header and main steam pipe of high pressure, ultra-high pressure and subcritical utility boiler.

Land transportation inquiry: (RMB fee) it is required to master the kilometers and towing price of major cities; packing price of each port area; customs clearance fee, commodity inspection fee, and animal and plant inspection fee standard. Key information to be clarified after accepting the consignation of the consignor (generally fax): shipping date, number of packages, box type, box quantity, gross weight and volume.

Since the welding process is often used in the fabrication and processing of steel structures, it is very important for low-alloy high-strength steels of such purpose to be welded using the arc welding process that is widely used in thin thickness plates and steel strips. Yes, the welding seam of the steel structure should have the required strength and toughness, so as to withstand the most unfavorable conditions for the intended use. At present, the development of A633 Grade C steel plate, low-alloy high-strength steels is carried out simultaneously with the development of various welding processes. Most low-alloy high-strength steels can be welded well.