API 5L X42 (L290) PSL1 steel material Carbon Steel Supplier

The company has API 5L X42 (L290) PSL1 steel material advanced production equipment and machining technology, excellent marketing team and domestic regional channel partners, and sound management plan for product market development and after-sales service. After years of cooperation experience API 5L X42 (L290) PSL1 steel material, we have accumulated a large number of customers at home and abroad, and won unanimous praise.

Under normal exposure to the atmosphere, API 5L X42 (L290) PSL1 steel material, bare steel forms a tight protective oxide film during the first few months of atmospheric corrosion. Sometimes architects choose bare steel structures because they want to get the appearance of uniform atmospheric oxidation on the steel surface, and sometimes they are to save the protective coating for economic purposes. To use these low-alloy high-strength steels in a bare state, the design must consider that the surface of the steel cannot be wet for a long time, and special attention should be paid to the special atmospheric environment to ensure that the corrosion rate of the steel is allowed under this condition.

The large diameter cold drawn seamless steel pipe is a steel pipe with an outer diameter of more than 1000mm. The large diameter seamless steel pipe is made of steel ingot or solid billet through perforation and then hot rolling, cold rolling or cold drawing. If they are long, they need to remove the redundant parts, that is, cut them out. Their length API 5L X42 (L290) PSL1 steel material is suitable for the length required by the construction of steel pipes.

"Our mill has three production lines:1).2500mm production line (Width: 1600-2300mm, API 5L X42 (L290) PSL1 steel material Thickness: 6-30mm, Annual capacity: 1,600,000 Tons; 2).3500mm production line (Width: 2000-3050mm, Thickness: 10-80mm, Annual capacity: 2,000,000 Tons; 3).4300mm production line (Width: 1500-4100mm, Thickness: 6-300mm, Annual capacity: 1,800,000 Tons; The weight of each ingot can reach API 5L X42 (L290) PSL1 steel material 44 tons, which is at the leading level in China. In addition, we have a 1700mm hot-rolled coil production line (width range: 900-1550mm, thickness range: 1.2-25.4mm, annual API 5L X42 (L290) PSL1 steel material production capacity: 3.5 million tons."

20# seamless steel pipe chemical composition: C: 0.07-0.23, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.25, Ni: 0.30, Cu: 0.25. 20# seamless steel pipe mechanical properties: recommended heat treatment temperature: 910℃, tensile strength: 410 MPa, yield strength: 245 MPa, elongation: 25%, impact energy is not required. 20# seamless steel pipe hardness is higher than 10# seamless steel pipe. API 5L X42 (L290) PSL1 steel material, 20# seamless steel pipe has good weldability, no temper brittleness, and its machinability can be improved by water quenching. 20# seamless steel pipe can be used to make welded components, as well as parts with small load after forging, hot stamping and cutting.

If customers have any difficult problems during use of the steel materials, they can contact the company's after-sales service department to feedback the existing problems. The after-sales department will reply as soon as possible to ensure that each customer has a good after-sales experience. Under special circumstances, the after-sales service department will start the problem-solving process, and the engineers in charge of the area will quickly follow up to solve the problem.