ABS Approval Certificated corten a steel indonesia supplier

Our quality control department will do inspection for details of the steel materials corten a steel indonesia before delivery. We would invite the customer side to attend the inspection together. If they can not come, we will also take rich pictures for them to check. Meanwhile, we will publish inspection report and send them the PDF version. Besides, we accept any third party inspection such as SGS, BV, etc. And our quality control department will support the third party to inspect the steel materials smoothly and try our best to deliver the qualified steel materials to customers earlier.

The wear-resistant plate corten a steel indonesia shows good wear resistance: the chemical composition of the alloy layer contains 4-5% carbon and 25-30% chromium. The volume fraction of Cr7C3 carbide in the metallographic structure is more than 50%, the macro hardness is HRC56-62, and the hardness of chromium carbide is HV1400-1800. Because of the vertical distribution of carbides in the wear direction, the wear resistance of the cast alloy with the same composition and corten a steel indonesia hardness is more than twice as that of the cast alloy with the same composition and hardness. Compared with several typical materials, the wear resistance is as follows: (1) compared with low carbon steel; 20-25:1 (2) with as cast high chromium cast iron; 1.5-2.5:1.

Facing the new situation and facing new goals, the company revolves around the sixteen-character development policy of “prioritizing production preservation, society-oriented, market operation, and brand creation and efficiency”. Layout the country in accordance with the modern logistics model, and accelerate the establishment of a modern integrated steel enterprise integrating steel storage, transportation, processing, and distribution.

Weathering steel generally adopts the process route of fine material into the furnace-smelting (converter, electric furnace-microalloying treatment-argon blowing-LF refining-low superheat continuous casting (feeding rare earth wire)-controlled rolling and cooling. The scrap steel is added into the furnace together with the charge, and smelted according to the conventional process. After the corten a steel indonesia steel is tapped, deoxidizers and alloys are added. After the molten steel is treated with argon blowing, the molten steel is cast. By adding rare earth elements to the steel, the corten a steel indonesia weathering steel is purified and the content of inclusions is greatly reduced.