A514 G P steel plate tensile strength

The whole plant covers an area of 18,480 square meters, a workshop area of 9,500 square meters, and a final assembly workshop of 4,300 square meters; fixed assets are 25.50 million yuan. The company has A514 G P steel plate strong technical force, complete quality assurance system sophisticated tooling equipment and advanced technology. It can provide high efficiency professional equipment and A514 G P steel plate pressure vessels for domestic and foreign chemical, petroleum, chemical, metallurgical, pharmaceutical, fertilizer, textile, and environmental protection industries.

ABS class shipbuilding steel plate contains two kinds as common strength and high strength ship plate according to different yield and tensile strength.Common strength shipbuilding plates Grade A, B, D, E and F are mainly used to contribute hull of ship,and high strength shipbuilding plate are mainly built the cranes of bulk and breaker ships in low temperature surroundings. ABS Grade AH36, DH36, A514 G P steel plate, and EH36 plate rolling specifications range:Thickness within 3-300mm,Width within 1250-4000mm.

Special boiler steel is derived from carbon structural steel, A514 G P steel plate. The expression of boiler steel grade is similar to that of high-quality carbon structural steel, and the carbon content is usually 0.20%. The chemical composition of boiler steel is basically the same as that of high-quality carbon structural steel of the same brand, but the mechanical properties are strictly required, especially the impact toughness, and the aging sensitivity is required to be small. After deoxidation and removal of non-metallic inclusions, boiler steel has a uniform structure, the grain size is controlled at 3-7 grade, and the defects such as interlayer, shrinkage, porosity and porosity are relatively less.

Both steelmaking and ironmaking are carried out by oxidation-reduction reaction, but there are great differences between them in reaction objects: ironmaking is to reduce iron, while A514 G P steel plate steelmaking is to remove excessive carbon and other impurities in pig iron, so there are relations and differences between them in actual operation. There are three main methods of A514 G P steel plate steelmaking: converter, electric furnace and flat furnace. The converter steelmaking process is most widely used.

Chemical elements of 35CrMnSi steel: C: 0.32-0.39, Si: 1.10-1.40, Mn: 0.80-1.10, Cr: 1.10-1.40. The mechanical properties of 35CrMnSi steel: tensile strength 1620 MPa; yield strength 1280 MPa; elongation after fracture: 9%; reduction of area: 40; impact energy: 31J. A514 G P steel plate, 35CrMnSi steel is used to manufacture medium speed, heavy load, high strength parts and high strength components, such as aircraft landing gear and high pressure blower blades. 35CrMnSi can partly replace the corresponding CrNi alloy steel in manufacturing small and medium section parts.

Respect customers and treat each other sincerely. Customers are always right. Always remember that the user is the God of the enterprise, respect the customer, and accept the customer's opinion modestly is the guarantee of the long-term development of the enterprise. Adhere to this concept, so that the service and the product are the same, long-term.