6mm thick Steel A283 Grade C Plate stock resources

The company attaches great importance to systematic management, and has passed the ISO9001 quality management system, ISO14001 environmental management system, OHSAS18001 occupational health and safety management system, and ISO 9001: 2008 certification. Insist on quality and promote brand development. The company's physical and chemical testing equipment is fully equipped and the quality management operation is standardized. Since 2002, the national, provincial, and municipal product quality inspection random inspection pass rates are all 100%.

,Steel A283 Grade C Plate., A588GrB material is a high-strength low-alloy structural steel in shapes of profiles, plates and bars. Through the alloying of Cu, P, Cr, Ni, a protective layer is formed on the surface of the metal substrate, so that A588GrB steel has a high resistance to atmospheric corrosion. A588GrB high-strength low-alloy steel is widely used in various weather-resistant building structural parts (especially for industrial atmospheric environments), bridge auxiliary structural parts.

Steel A283 Grade C Plate,Advantages of NM360 wear-resistant steel plate: NM360 steel has high strength: generally its yield strength is above 300MPa. 2. High toughness: The elongation is required to be 15% -20%, and the room temperature impact toughness is greater than 600kJ / m ~ 800kJ / m. For large welded components, high fracture toughness is also required. 3. NM360 steel plate has good welding performance and cold forming performance. 4. Low cold and brittle transition temperature.

Steel A283 Grade C Plate,The preparation of galvanized steel before welding is the same as that of ordinary low-carbon steel. It is necessary to carefully handle the groove size and nearby galvanized layer. In order to achieve penetration, the groove size shall be appropriate, generally 60 ~ 65 °, with a certain gap, generally 1.5 ~ 2.5mm; in order to reduce the penetration of zinc into the weld, the galvanized layer in the groove can be removed before welding. In the practical work, the centralized beveling, no blunt edge technology for centralized control, two-layer welding process, reducing the possibility of incomplete penetration.
Steel A283 Grade C Plate

Steel A283 Grade C Plate,S355J2G3 is low alloy high strength structural steel, and it is roughly equivalent to GB Q345D.
S355J2G3 is a European standard steel with composition of C ≤ 0.20, Si ≤ 0.55, Mn ≤ 1.60, P ≤ 0.035, S ≤ 0.035. The meaning of J2G3 indicates that the delivery state of S355J2G3 steel is normalized, the impact energy at - 20 ℃ is 27J. G3 and G4 indicate the deoxidization mode. S355J2G3 steel is semi killed steel, S355J2G4 steel is fully killed steel.
Steel A283 Grade C Plate

Our company has established and constantly improved the customer service system and emergency response system. Through the customer service management system, we track the service of the after-sales service team and provide efficient and standard services in time. At the same time, the company formulates a regular return visit system, compares the historical cases of customer problems, proposes a pre solution, and ensures that the service is in place in a short time.
Steel A283 Grade C Plate