4x8 Ms Steel Plate FH36 hull structure steel

We can process the steel materials according to your drawing. Or if you can not make drawing, please send us FH36 hull structure steel specific data and requirements, our technical department can make design and drawing for you, and then confirm with your technician or engineer. If all is OK, our processing center will process the steel materials according to the drawing. So no matter what size and shapes you need, we can meet demands at the most time.Quenching is a common heat treatment process. It is the metal heat treatment process in which the FH36 hull structure steel metal workpiece is heated to a proper temperature and kept for a period of time, then immersed in the quenching medium for rapid cooling. Quenching can improve the strength and hardness of steel in a large range, and adjust the coordination between FH36 hull structure steel strength and hardness, plasticity and toughness Quenching is generally used as the final heat treatment,FH36 hull structure steel., P355GH steel yield strength in different thickness has different values.Thickness 8-16mm: 355MPa min., ＞16-40mm: 345MPa min., ＞40-60mm: 335MPa min., ＞60-100mm: 315MPa min., ＞100-150mm: 295MPa min., ＞150-250mm: 280MPa min. The elongation minimum is 20%. P355GH plate under EN10028-2:2003 standard is a pressure vessel steel. It is always delivered in hot rolling, controlled rolling, normalizing.To the society: With the development of the company, BEBON has always adhered to the development mission of "developing heavy industry for the benefit of all mankind; improving the environment and achieving sustainable development”, operating with integrity and paying taxes in accordance with law.For our employees, the company fully respect employee value, pursuing mutual development of enterprise and employees.