20mm thick A387 GR.5 CL.1 pressure vessel steel sheet stock from China supplier

Flat steel is a kind of steel with rectangular cross-section and blunt edges at the edges and corners. It is usually 12-300 mm wide and 3-60 mm thick. Compared with A387 GR.5 CL.1 pressure vessel steel sheet ordinary steel plate, the utilization rate of flat steel is increased by one to five percentage points. Moreover, flat steel can be produced with fixed thickness, width and length according to the user's requirements, which saves the cutting process for users, reduces the consumption of labor and materials, and also reduces the processing loss of raw materials, saving time, labor and material.

2020 October stock A387 GR.5 CL.1 pressure vessel steel sheet product: 8*1800*10950, 16*2150*10950, 70*2270*7350, 6*2200*10000, 20*3200*4400, 20*2280*5800, 20*2100*10800, 70*2270*7000, 12*2050*5100, 20*3200*4400, 12*2000*11850, 14*2940*9600, 20*2150*10000, 70*2260*7700, 6*1950*10000, 12*2000*11850, 6*2200*10000, 14*2510*10950, 16*2150*10000, 70*2260*7240, 20*3200*4400, 6*2200*10000,20*2100*7000, 12*2500*8000, 20*2100*10750, 35*2200*6800, 12*2000*11850, 20*2100*7000, 31.2*2950*9380.

The main applications of normalizing are as follows:① For low carbon steel, A387 GR.5 CL.1 pressure vessel steel sheet. The hardness of low carbon steel after normalizing is slightly higher than that after annealing, and the toughness is also better, so normalizing can be used as the pretreatment of cutting.② For medium carbon steel, normalizing can be used as the final heat treatment instead of quenching and tempering treatment, or as the preparation treatment before surface quenching by induction heating.③ Normalizing can be used in tool steel, bearing steel, carburizing steel and so on, which can eliminate or inhibit the formation of network carbide, thus obtaining the good microstructure needed for spheroidizing annealing.④ Normalizing can refine the cast structure and improve the machinability of steel castings.

Phosphorus element (P element) is brought into steel by ore. Generally speaking, phosphorus is also harmful element. Although phosphorus can increase the strength and hardness of A387 GR.5 CL.1 pressure vessel steel sheet etc. steel, it also causes the decrease of plasticity and impact toughness. Especially at low temperature, it makes steel significantly brittle, which is called "cold brittleness". The higher the phosphorus content is, the greater the cold brittleness is. Therefore, the phosphorus content in A387 GR.5 CL.1 pressure vessel steel sheet etc. steel is strictly controlled.